Complete stainless steel anchor assembly for outdoor use. It comprises of a Coeur Hanger, expansion bolt and nut. The bolt is 12mm diameter and 70mm long.
- Comprised of a Coeur Stainless Steel hanger, nut and bolt.
- 316L stainless steel offers excellent resistance to corrosion in typical exterior environments.
- Hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use.
- The wide, ergonomic connection hole facilitates karabiner clipping.
- The width of the hole allows the clipping of two karabiners at the same time.
- The thickness of the hanger and the rounded edges of the connection hole limit wear on karabiners.
Material(s): 316L stainless steel.
Certification(s): EN 795 A1, EN 959.
| References | P36BS 10 |
| Diameter | 10 mm |
| Weight | 110 g |
| Length | 7 cm |
| Drilling depth | 7 cm |
| Drilling diameter | 10 mm |
| Resistance to cutting on concrete 50 MPa | 25 kN |
| Pull-out strength in concrete 50 MPa | 25 kN |
| Guarantee | 3 years |
| Packing | 20 |