DMM Dragon Cam

From £60.30
£67.00
Save 10%

A twin axle, single stem camming device to rival BD's Camalot.

The cams use a single stem with hot forged cams mounted on a dual axle - this gives a better range than single axle designs, but DMM have kept Ray Jardine's original 13.75° constant camming angle that maximises holding power.

DMM Dragon Cam

00, Blue
£60.30
£67.00
Save 10%
3 In Stock
0, Silver
£60.30
£67.00
Save 10%
3 In Stock
1, Purple
£60.30
£67.00
Save 10%
3 In Stock
2, Green
£63.90
£71.00
Save 10%
4 In Stock
3, Red
£63.90
£71.00
Save 10%
4 In Stock
4, Gold
£67.50
£75.00
Save 10%
3 In Stock
5, Blue
£69.75
£77.50
Save 10%
2 In Stock
6, Silver
£72.00
£80.00
Save 10%
3 In Stock
7, Purple
£81.00
£90.00
Save 10%
3 In Stock
8, Green
£89.99
£100.00
Save 10%
2 In Stock
Set 00,0,1
£171.00
£190.00
Save 10%
1 In Stock
Set 2,3,4
£175.50
£195.00
Save 10%
1 In Stock
Set 0,1,2,3,4,5
£337.50
£375.00
Save 10%
1 In Stock

A twin axle, single stem camming device to rival BD's Camalot.

The cams use a single stem with hot forged cams mounted on a dual axle - this gives a better range than single axle designs, but DMM have kept Ray Jardine's original 13.75° constant camming angle that maximises holding power. Extendable, double Dyneema sling saves on quickdraws and reduces the weight of your rack even further.

Eight sizes to cover a range from 13mm to 114mm.

The cams use relatively strong springs - this means the units feel slightly harder to retract, but the advantages are worth it: they will sit more securely in placements, they will have improved resistance to being pulled out of low friction placements and they will walk less.

The thumb termination uses an aluminium forging that is massively strong, resistant to abuse and crucially allows use of an extendable sling. Early prototypes used a wire loop but it was found that the dyneema sling could damage this and the forging is actually lighter than the wire loop it replaced.

The stem uses 5.5mm stainless steel wire cover in a hydrolysed nylon sleeve. The nylon sleeve rotates freely to reduce abrasion damage and gives the units really good flexibility throughout 360°. In addition DMM have used very short terminations that increase flexibility. Thus when the cams are placed in shallow vertical or horizontal cracks the units are less likely to be levered out of the placement. The trigger bar is made from the same material and is very positive in use, with sufficient relief to offer grip to the sweatiest of fingers.

The anodised cams ar colour coded for easy size recognition.

This new version has wider, milled cams for a better grip!

DMM Dragon Cams
Number Colour Size-range Headwidth Strength Passive Strength Weight
00 Blue 13mm - 21mm 39.1mm 10kN 9kN 75g
0 Silver 16mm - 25mm 40.1mm 14kN 12kN 85g
1 Purple 20mm - 33mm 40.2mm 14kN 14kN 103g
2 Green 24mm - 41mm 40.8mm 14kN 14kN 117g
3 Red 29mm - 50mm 42.2mm 14kN 14kN 128g
4 Gold 38mm - 64mm 51.2mm 14kN 14kN 154g
5 Blue 50mm - 85mm 55.4mm 14kN 14kN 208g
6 Silver 68mm - 114mm 66.1mm 14kN 14kN 299g
7 Purple 88mm - 149mm 85mm 14kN 14kN 368g
8 Green 116mm - 195mm 95mm 14kN 14kN 525g

DMM will repair their own cams, Mambas and Torque Nuts if they are less than 10 years old. Please see DMM Returns, Servicing & Repairs.

We have placed cookies on your device to help make this website better.

Your order contains no items