Directions: Clean and dry area to be repaired. Trim loose threads. Join torn edges of material. For smaller repairs, cut tape for appropriate size, allowing overlap of repair of at least 1 inch (25mm) in all directions. Round the edges of tape for best adhesion. Remove paper backing and apply to damaged area over hard, flat surface. May be applied to outside surface or inside surface depending upon cosmetic preference, or both sides for the highest performance repair. After applying, rub with pressure using circular motion from centre out. Item may be used immediately. Adhesive reaches full strength in 24 hours.
Adhesive Option: If more permanent repairs are desired. Tenacious Tape can be used with Seam Grip® or Aquaseal® Urethane Adhesives. If used in this manner, follow adhesive application instructions and overlap the adhesive with Tenacious Tape by at least 1 inch (25mm). Once adhesive is fully cured, the tape may be removed if desired.
Storage and Care: Store unused portion of tape in sealed plastic bag. Tenacious Tape is washable. Do not dry clean.