A spray on version of TX-Direct suitable for use on garments such as Buffalo Double P, where penetration to the internal materials is not desirable. It will make water bead up on the surface of fabrics but can't mend holes!
Can also be used on breathable tents and bivi-bags: clean by sponging off the tent or bivy with a solution of Nikwax Tech Wash and water to remove any dirt. ( Note: do not wash in a washing machine.) You may also spray with water to remove dirt or soap, rinse thoroughly.
Treat by applying Nikwax TX Direct Spray-On while the fabric is still damp, spray generously and evenly on the outer side of the fabric, rub into the fabric with a damp cloth to ensure even distribution. Check to make sure no areas of the fabric have been missed. Allow to soak into cloth for 5 minutes and then wipe all excess (drips, runs, puddles) away with a damp cloth. Wipe away drips, runs or puddles 15 minutes later. (Note: Failure to do so may leave a white residue) Tent floors or bottoms that are not made with waterproof/breathable fabrics should be treated with Nikwax Texnik. Follow the same instructions as for above. Apply a second coat to areas of high traffic or abrasion. Allow the first coat to dry before applying the second, rewet the fabric before applying so that it is damp to the touch.
Maintain after treating by sponging it off with a solution of Nikwax Tech Wash and water followed by a thorough rinse with water.
Available in 300ml and 500ml sizes.